Allen N asked:


I recently moved my company to a new building and added a few more managed switches. Prior to the move, we were operating on a single switch connected directly to the router. Our new location currently is running on three switches with all ports full.

Since the move, the network has slowed dramatically. By network i mean our internal LAN. Is there any sort of management i should be setting on the ports that link the switches together to increase speed?

These switches are not daisy chained but rather two switches connect into the one that is connected to the router.

The switches are HP Procurve 1800-24G managed switches. The ports are 10/100/1000. The switch is a store n forward.

active network management

Jeremy S asked:


All right to sum it up, i got ubuntu 8.10 installed and i got the wireless driver installed. I can connect to the network in my school and browse, download and update perfectly. When i am at home, i cannot connect to my linksys router, it is unprotected and unsecured. I connect it tries for a second and then a bubble comes up and says, “Network Disconnected” Below is the following iwconfig. Thanks for your help. It is greatly appreciated!

lo no wireless extensions.

eth0 no wireless extensions.

wmaster0 no wireless extensions.

wlan0 IEEE 802.11abgn ESSID:”linksys”
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Tx-Power=23 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

pan0 no wireless extensions.

network management resources

Queen_ika asked:


I’ve got a research project to do in Computer Management, and I need to know what is State -of-the-art, and what can i write about it and network management overview, and if grid computing is part of state of the art? .. thnx a lot people …

networks management

EILISHA asked:


Hi I am thinking about going into a program called a Network Cabling Specialist. It’s a 3 month program(including a interning process at the end of the program). I have a bachelors in management and organizational development but am unhappy with the pay (I make 14.00 an hour). I was hoping that i would be able to live comfortably, if I got my education, but that doesn’t seem to be the case. I am currently a project coordinator for a I.T department and am interested in becoming hands-on, with the technical side of I.T instead of the I.T. Business only side.

Please tell me what you think… Do you think the job market is right for me to be making a career change right now? Also, what type of jobs would I be able to get and about how much will they pay to start on the networking technical side?

iso network management model

tjlmbklr asked:


I have a Trendnet TEW-631 BRP wireless N router. I have also a D-link wireless N express card for my laptop. I have tried setting my router to broadcast in “n” only and to broadcast in “b,g, and n” But in my wireless management page where it shows all the available networks (including mine) I hold my mouse over my network and it says “802.11g” for radio type. Why won’t it give a 802.11n?
I am married to a beautiful woman and my computer is a useful tool that I pay money for so no I don’t need to “find a date”

network management corporation

nyc718kb asked:


I am the Network Administrator for a company that is moving to a new location and wishes to upgrade its computer systems and double the work force. Currently, the company has 35 employees running Windows 98 on a Windows NT 4.0 domain. 10 employees are in management, 5 are in programming, 5 are in sales, and 15 are in graphics and development. The company wishes to create a research team and provide me with an IT staff, as well as increase the size of the other teams. At the new location, the office is already wired for Internet connection. The Internet Service Provider has issued the company an IP address range of 128.174.7.0 to 128.174.7.64. I must provide a proposal that includes a Server solution, the amount of new computers, printers, and servers to purchase, and the Operating System to install. I must also create a plan for IP addresses of the computers and servers. Finally, I must add network printers and shared group permissions for printers and file server storage and be sure to provide the groups I create and the members of the groups.

I am new to this job straight out of college and am a little perplexed. I had some ideas, but I wanted to get some fellow IT pros opinions. Could someone please help me out in devising a simple enough plan?

network management port

ashwath_ravi asked:


it may either in the domain of network security or in the related traffic monitoring and management..

network management best practices

davo asked:


I just re-installed windows on my toshiba satellite that i’ve had for a few years (virus problem), and now i get disconnected from the wireless internet whenever i switch to battery power. there are no problems on AC power, and it was working fine before the re-install. i’ve checked the driver and made sure that it doesnt get turned off to save power under the power management tab of the intel pro/wireless network driver window. any ideas?

network management ltd

Sky asked:


Looking for some general information on setting up a home telephone networking system that is able to support the common features such as call transfers, but most importantly use an existing land line for external calls. Some questions I have are:

1) Is a server required, and what software and management utilities does it need to run. (Os: Windows, Linux, Mac)
2) If a server is not required, can I alternatively use one desktop PC with network access (Wireless / LAN) with the phone connected locally to each machine.
3) What hardware, apart from a networking capable phone, is required? Will default networking cards be sufficient? Is there other hardware required?

Thanks,

Ryan

network management software

mb69t2 asked:


Hi, I am sharing a house with someother people and my basestation for the shared internet is located in another room. Is there a software utility available (free) to view users on my network and kick them as some people are taking over the bandwidth.

Thanks.

Im running OSX Tiger 10.4.8 and ive tried the following with no success..

Airport Admin utility
Airport Client Monitor
Airport Management Utility

business network management